DESIGN AND DEVELOPMENT OF PORTABLE DOMESTIC WASTE BURNER

Authors

  • Dr. GIRISHA L Associate professor Department of mechanical engineering pesitm, shivamogga
  • Mr. MAHANTHESH M R Associate professor Department of mechanical engineering pesitm, shivamogga
  • Mr. Shivananda D C Associate professor Department of mechanical engineering pesitm, shivamogga
  • Mr. Rajashekhara M C Associate professor Department of mechanical engineering pesitm, shivamogga

DOI:

https://doi.org/10.7324/IJERAT.2018.3229

Keywords:

Waste, Iincinerator, Thermo Electric Generator (TEG), Burner.

Abstract

Waste generation is a continuously growing problem at Global regional local levels. Improper disposal of various ways pollutes all the vital components of living environment. If proper collection of waste from authorities and disposal of waste is not carried properly, then the environmental and health issue will arise. The present work is made to fabricate a domestic purpose portable waste burner. The fabrication of incinerator Chamber different stages provided for wet and dry waste separately. To control various health hazard, contain during burning and flue gases, a Purolator filter is introduced, Further, a concept of Thermoelectric Generator (TEG) is placed in the inner chamber of the burner and 1300C heat is converted into power of 5 to 8 volts. The performance test was carried out after the fabrication. 8kg of waste was burnt in the chamber and the time duration to burn is 25 minutes. The flue gases have passed through the filter and exhausted through the chimney. The burner was successfully burnt the waste with less time. Thermal analysis for the incinerator chamber was carried out analytically, numerically by using ANSYS and results are found to be validated with experimental values.

Downloads

How to Cite

Dr. GIRISHA L, M R, M. M. ., D C, M. S., & M C, M. R. . (2018). DESIGN AND DEVELOPMENT OF PORTABLE DOMESTIC WASTE BURNER . International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 4(4), 07–12. https://doi.org/10.7324/IJERAT.2018.3229