Design And FEM Analysis of Helical Gear

Abstract

In this paper the problem of the failure of gear in speed reduction gearbox developed by Laxmi Hydraulic Pump (LHP) Pvt Ltd, Solapur is resolved by replacing the existing material by a material SAE8620. The Gear and Pinion using AGMA and FEM analysis Method. In the gear design, the bending stress and surface strength of the gear tooth are considered to be one of the main factors to the failure of the gear. In this paper bending and contact stresses are calculated by using analytical method as well as Finite Element Method. To estimate bending stress modified Lewis beam strength method is used as well as AGMA method. Software is used to generate the 3-D solid model of helical gear. Ansys software package is used to analyze the bending stress. Contact stresses are calculated using modified AGMA contact stress method. Ansys software package is used to analyze the contact stress and bending stress. The main objective of this study has to investigate the stresses induced by gear tooth profile.  Finally, the results obtained by theoretical analysis and Finite Element Analysis are compared to check the correctness. Estimated stress is used to calculate module of gear which can withstand easily at given loading conditions.  A conclusion has arrived on the material which is best suited for helical gear based on the results.