STUDY OF WEAR CHARACTERISTICS OF BONE PARTICULATE REINFORCED EPOXY COMPOSITES

Authors

  • Harish. S Research Scholar,Department of Mechanical Engineering, Sri Siddhartha Institute of Technology
  • Sanjeeva Murthy Professor, Department of Mechanical Engineering, Sri Siddhartha Institute of Technology
  • N S Venkatesh Guptha Professor, Department of Mechanical Engineering , Siddaganga Institute of Technology Tumkur -572103, Karnataka, India.

DOI:

https://doi.org/10.31695/IJERAT.2018.3326

Keywords:

Bone particulate, Wear test, Scanning electron microscopy.

Abstract

Particulate reinforced epoxy composite is widely used in industrial application. The demand for the development of low cost, less weight leads to the production of the new composite material. The aim of this paper is to study the wear behavior of Epoxy with different wt% of the bone particulate reinforced composite. The results show that specific wear rate decreases with increase in filler content. The wear volume loss and specific wear rate may be optimum for 6-7wt% of the filler material. SEM (Scanning electron microscopy) technique was used to validate the experiment results.

Downloads

Published

2018-09-05

Issue

Vol. 4 No. 9 (2018): Vol 4 Issue 9 September 2018

Section

Articles

How to Cite

STUDY OF WEAR CHARACTERISTICS OF BONE PARTICULATE REINFORCED EPOXY COMPOSITES. (2018). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 4(9), 53-57. https://doi.org/10.31695/IJERAT.2018.3326