Comparative Analysis of Raw Materials Control Using JIT and EOQ method For Cost Efficiency of Raw Material Supply in Automotive Components Company Bekasi, Indonesia

Authors

  • Jakfat haekal
  • Ifnu Setiawan

DOI:

https://doi.org/10.31695/IJERAT.2020.3661

Keywords:

Economic Order Quantity , Just In Time , Inventory Management, Efficiency

Abstract

The company where the author conducted research is a company engaged in the automotive sector that produces various seals for motor vehicles and heavy equipment. The raw material used is rubber (synthetic rubber). This company has difficulty determining the amount of Rubber inventory by the needs so that there is no excess inventory stock that can cause excess inventory costs. The method used in this research is Economic Order Quantity (EOQ) and Just In Time (JIT). The author intends to compare the two methods to the cost efficiency of raw material inventory and choose which method is more appropriate for this company. From the research, it is known that the inventory costs incurred by the company are Rp. 6,048,000, while the result of the cost calculation using the EOQ method is Rp. 3,678,175 and Rp's JIT method. 1,320,945. It can be concluded that the JIT method has the smallest total cost of inventory compared to the EOQ method and the company method.

The company where the author conducted research is a company engaged in the automotive sector that produces various seals for motor vehicles and heavy equipment. The raw material used is rubber (synthetic rubber). This company has difficulty determining the amount of Rubber inventory by the needs so that there is no excess inventory stock that can cause excess inventory costs. The method used in this research is Economic Order Quantity (EOQ) and Just In Time (JIT). The author intends to compare the two methods to the cost efficiency of raw material inventory and choose which method is more appropriate for this company. From the research, it is known that the inventory costs incurred by the company are Rp. 6,048,000, while the result of the cost calculation using the EOQ method is Rp. 3,678,175 and Rp's JIT method. 1,320,945. It can be concluded that the JIT method has the smallest total cost of inventory compared to the EOQ method and the company method.

 

References

Haekal, J., Hanum, B., & Adi Prasetio, D. E. 2020. Analysis of Operator Body Posture Packaging Using Rapid Entire Body Assessment (REBA) Method: A Case Study of Pharmaceutical Company in Bogor, Indonesia. International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(7), 27-36.

Hanum, B., Haekal, J., & Adi Prasetio, D. E. . 2020. The Analysis of Implementation of Enterprise Resource Planning in the Warehouse Division of Trading and Service Companies, Indonesia . International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(7), 37-50.

Kholil, M., Haekal, J., Eko Adi Prasetio, D. ., & Sulaiman Hasan. 2020. The Lean Manufacturing Design For Improving Production Scheduling Using Product Wheel Method in Chemical Manufacturing Company, Indonesia. International Journal of Engineering Research and Advanced Technology - IJERAT (ISSN: 2454-6135), 6(8), 12-18.

Haekal, J., & Setio, H. 2017. Selection of Raw Material Suppliers Using Analytical Hierarchy Process in Food and Beverage Company, South Jakarta. ComTech: Computer, Mathematics and Engineering Applications, 8(2), 63-68.

HAEKAL, J. (2018). PERANCANGAN DAN EVALUASI IMPLEMENTASI SISTEM MANAJEMEN MUTU ISO 9001: 2015 MELALUI KEPUASAN PELANGGAN DI UNIVERSITAS ISLAM AS-SYAFI’IYAH (Doctoral dissertation, Universitas Mercu Buana Jakarta).

Kholil, M., Haekal, J. H, Sulaiman. 2020. Lean Manufacturing Design to Reduce Waste in Gear Production Process Using VSM and Kaizen Method Approaches (Case Study: Gear Primary Driven K56 Product). Journal of Scientific and Engineering Research. 7(8), 1-9

Haekal, J., Hanum, B., & Adi Prasetio, D. E. 2020. Application of Quantitative Strategic Planning Matrix (QSPM) For Determination of Alternative Strategies in Food and Beverage SMES in Bogor Indonesia. Journal of Scientific and Engineering Research. 7(7), 137-145

Hanum, B., Haekal, J., & Adi Prasetio, D. E. . 2020. SPHC Material Inventory Control Analysis in Project VL01 Centralized by the EOQ Method in Automotive Company Indonesia. Journal of Scientific and Engineering Research. 7(7), 130-136

Andiana, M. (2017). Aplikasi Metode EOQ Dalam Pengendalian Persediaan Bahan Baku PT X. Jurnal Akuntansi Maranatha, Vol. 10(1), Hal. 31.

Aprilia, A., Sidik, M., D. & Fujiyanti, L. 2018. Sistem Penunjang Keputusan Persediaan Produksi Grafika Dengan Pendekatan Economic Order Quantity (EOQ). Jurnal Pasti, [online] Vol. 7(1), Hal. 34-49.

Apriyani, N. & Muhsin, A. 2017. Analisis Pengendalian Persediaan Bahan Baku Dengan Metode Economic Order Quantity Dan Kanban Pada PT. Adyawinsa Stamping Industries. Jurnal Optimasi Sistem Industri,

Bhargava, A. 2017. A Study on The Challenges And Solutions To Just In Time Manufacturing. International Journal of Business and Management Invention, [online] Vol. 6(12), Hal 47-54.

Chuong, S. C. & Stevenson W. J. 2014. Manajemen Operasi: Prespektif ASIA (9th ed.). Jakarta: Salemba Empat.

Elmas, M. S. H. 2017. Analysis Control Supplies Raw Material With The EOQ Methods In The Smoothness Of The Production Process. International Journal of Social Science and Business, [online] Vol. 1(3), Hal. 186-196.

Fajrin, E. H. A. & Slamet, A. 2016. Analisis Pengendalian Bahan Baku Dengan Menggunakan Metode Economic Order Quantitiy (EOQ) Pada Perusahaan Roti Bonansa. Management Analysis Journal Universitas Negeri Semarang, [online] Vol. 5(4), Hal. 292.

Herjanto, E. 2009. Sains Manajemen – Analisis Kuantitatif Untuk Pengambilan Keputusan. Jakarta: Grasindo.

Nasution, A. H., & Prasetyawan, Y. 2008. Perencanaan & Pengendalian Produksi (1st ed.). Yogyakarta: Graha Ilmu.

Prawirosentono. 2005, Riset Operasi Dan Ekonofisika (1st ed.). Jakarta: Bumi Aksara.

Downloads

How to Cite

haekal, J., & Setiawan, I. (2020). Comparative Analysis of Raw Materials Control Using JIT and EOQ method For Cost Efficiency of Raw Material Supply in Automotive Components Company Bekasi, Indonesia. International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) DOI: 10.31695/IJERAT, 6(10), 76–82. https://doi.org/10.31695/IJERAT.2020.3661

Issue

Section

Articles