Wear Behaviour of Heat Treated Aluminium LM13 –MgO Particulate Metal Matrix Composites

Authors

  • C S Ravindra Sagar Research scholar, Department of Mechanical Engineering, Sri Siddhartha Institute of Technology, Tumkur-572105, Karnataka, India.
  • T. K Chandrashekar Professor, Department of Mechanical Engineering, Mangalore Institute of Technology, Moodabidre, Mangalore- 574225, Karnataka, India.
  • Batluri Tilak Chandra Research scholar Department of Mechanical Engineering, Sri Siddhartha Institute of Technology, Tumkur-572105, Karnataka, India.

DOI:

https://doi.org/10.7324/IJERAT.2018.3184

Keywords:

Al LM13, Wear Rate, MgO, Pin-on-Disc test rig.

Abstract

Aluminum MMC’s are getting to be plainly potential material offering the phenomenal mix of properties, for example, high specific stiffness, thermal conductivities, low coefficient of heat development and wear protection. As a result of their superb blend of properties, AMMC's are being utilized as a part of assortments of utilizations in automobile vehicle, aviation and other related segments. In the present examination, Al LM13-MgO composites were created by Vortex technique by differing weight level of support from 0 wt.% to 10 wt.% in ventures of 2. The pin on disk wear tests was directed to analyze the wear conduct of the aluminum LM13 and its composites. T6 heat treatment studied. The outcome uncovers that wear rates of the composite. The wear rate is more in As-Cast LM13/MgO compared to heat treated condition. The consolidation of MgO as support particles in aluminum LM13 composite enhances the Tribological physical characteristics.

Downloads

Published

2018-02-05

Issue

Vol. 4 No. 2 (2018): Vol 4 Issue 2, February 2018

Section

Articles

How to Cite

Wear Behaviour of Heat Treated Aluminium LM13 –MgO Particulate Metal Matrix Composites. (2018). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 4(2), 18-23. https://doi.org/10.7324/IJERAT.2018.3184