Performance of E-Glass/Epoxy Windmill wound Rotor based on Structural Analysis

Authors

  • Kannan S Jeppiaar Institute of Technology Chennai, India
  • Dr.Venkatamuni T Jeppiaar Institute of Technology Chennai, India
  • Vinoj Kiran I Jeppiaar Institute of Technology Chennai, India.

Keywords:

Composite material, Deflection, E-glass/Epoxy materials. Specific Stiffness, Strength, Wind Mill.

Abstract

This work deals with 2.1 MW 50Hz, 60Hz wind mill induction generator has very flexible and complicated model of rotor the Performance of conventional two-piece steel rotor shaft replaced with a single-piece e-glass/epoxy because of higher specific stiffness and strength of composite materials. Various speeds (Rated speed, overall speed, Critical speed) of wind mill wound rotor is analyzed with conventional steel and e-glass/epoxy materials and choose the best material based on the comparison. This project carries on the design and analysis process for the steel and E-glass/Epoxy materials.

Downloads

Published

2016-04-05

Issue

Vol. 2 No. 4 (2016): Volume 2 Issue 4 April 2016

Section

Articles

How to Cite

Performance of E-Glass/Epoxy Windmill wound Rotor based on Structural Analysis. (2016). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 2(4), 01-06. https://ijerat.com/index.php/ijerat/article/view/136