EFFECT OF PREHEATING ON THE HARDNESS of Al25Mg2Si-2Cu-4Mn ALLOY

Authors

  • Shruti S Walikar Post graduate Scholar, production Engineering and system technology,
  • Neeta S Mathapati Associate professor, Department of Mechanical Engineering, Department of Mechanical Engineering B L D E A’s Dr. P. G. H CET vijayapur-586103, Karnataka, India

Keywords:

preheated material, as cast specimen, Brinell’s hardness testing machine.

Abstract

In this paper the investigation is done on the hardness of Al25Mg2Si-2Cu-4Mn alloy. The preheated sample and as cast sample are tested on Brinell’s hardness testing machine with load of 500kg and readings were recorded and studied and the result reveal that the preheated material has highest hardness number than that of as cast specimen.

Downloads

Published

2016-06-05

Issue

Vol. 2 No. 6 (2016): Volume 2 Issue 6 June 2016

Section

Articles

How to Cite

EFFECT OF PREHEATING ON THE HARDNESS of Al25Mg2Si-2Cu-4Mn ALLOY. (2016). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 2(6), 44-48. https://ijerat.com/index.php/ijerat/article/view/164