Study of Abrasive Wear Behaviour of Al-Cu-Mg/Titanium Dioxide Particulate Reinforced Metal Matrix Composite

Authors

  • Vrupaksha Gouda Department of Mechanical Engineering, Rao Bhahoodru College of Engineering, Bellary, Karnataka, India
  • Chandru Department of Mechanical Engineering Rao Bhahoodru College of Engineering, Bellary, Karnataka, India

Keywords:

Metal matrix composite, Titanium dioxide, Macrostructure, Microstructure

Abstract

 In the present investigation, Aluminium based metal matrix composites containing Titanium Dioxide (TiO2) are synthesized using stir-cast method. Macro structural studies have shown near uniform distribution of Titanium dioxide particulates in the matrix material.  Influence of TiO2 particulate on dry sand rubber wheel abrasion wear characteristics was carried out to explore the feasibility of using this metal matrix composite, developed for abrasion wear resistance application. The details of the results obtained are presented in this paper. Resistance to wear has increased with increase in Titanium dioxide particles; wear has increased with increase in normal load and sliding velocity. Hardness has also increased with increase in weight percentage of TiO2 particles.

Downloads

Published

2015-07-05

How to Cite

Study of Abrasive Wear Behaviour of Al-Cu-Mg/Titanium Dioxide Particulate Reinforced Metal Matrix Composite. (2015). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 1(1), 25-27. https://ijerat.com/index.php/ijerat/article/view/63