Analysis of Operator Body Posture Packaging Using Rapid Entire Body Assessment (REBA) Method: A Case Study of Pharmaceutical Company in Bogor, Indonesia
DOI:
https://doi.org/10.31695/IJERAT.2020.3620Keywords:
Rapid Entire Body Assessment , Manual Handling, Boxed Material Storage.Abstract
In production activities, there is manual material handling activities which can cause work accidents. Pharmaceutical Company in Bogor has a packaging material warehouse that is still doing activities manually, such as using a hand pallet, taking cartons from trucks, moving cartons, putting cartons on a pallet. This activity causes injury to the muscles known as Musculoskeletal Disorders (MSDs). In 2018 the high absence of operators in the warehouse of packaging materials reached 26.89%, caused by injuries to the muscles of the body or Musculoskeletal Disorders (MSDs). The injury resulted in an inefficient packaging material warehouse, which could affect the production process, so a study was conducted to analyze the posture of the container material warehouse operator in carrying out its activities using the REBA method of the three packaging material warehouse operators. The REBA method is a method in the field of ergonomics that is used quickly to assess the posture of a worker 's neck, back, arms, wrists, and legs. Based on these problems, the purpose of this study is to analyze the operator's posture when carrying out work activities in the packaging material warehouse using the REB method and provide suggestions for improving the activities that cause complaints.
References
Bridger, R.S. (2003). Introduction to Ergonomics.International Second Editions. New York: MCGraw-Hill Book Co.
Hignett, S., & McAtamney, L. (2000). Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31(2), 201–205,
Iridiastadi, H., Yassierli. (2014). Ergonomi Suatu Pengantar. Bandung: PT. Remaja Rosdakarya.
Haekal, J., & Setio, H. (2017). Selection of Raw Material Suppliers Using Analytical Hierarchy Process in Food and Beverage Company, South Jakarta. ComTech: Computer, Mathematics and Engineering Applications, 8(2), 63-68.
HAEKAL, J. (2018). PERANCANGAN DAN EVALUASI IMPLEMENTASI SISTEM MANAJEMEN MUTU ISO 9001: 2015 MELALUI KEPUASAN PELANGGAN DI UNIVERSITAS ISLAM AS-SYAFI’IYAH (Doctoral dissertation, Universitas Mercu Buana Jakarta).
Joanda, A. D., & Suhardi, B. (2017). Analisis Postur Kerja dengan Metode REBA untuk Mengurangi Resiko Cedera pada Operator Mesin Binding di PT. Solo Murni Boyolali. Paper presented at the Seminar dan Konferensi Nasional IDEC.
Kazemi, S., Savas, S., & Aydos, L. (2016). Evaluation of Ergonomic Postures of Physical Education and Sport Science by REBA and Its Relation to Prevalence of Musculoskeletal Disorders. International Journal of Science Culture and Sport, 4(3), 2148-1148.
Kuswana, SW. (2014) .Ergonomi dan K3 Kesehatan Kesalamatan Kerja. Bandung:PT. Remaja Rosdakarya Offset.
MacLeod, Dan. (2000). The Rules of Work: A Practical Engineering Guide of Ergonomic. Taylor and France, New York: USA.
Majid, A., & Arifah, D. A. (2018). Posture Analysis Of Manual Handling At PT. X’s Workshop By Reba Method. Journal of Industrial Hygiene and Occupational Health, 2(2), 177-191.
Musyarofah, S., Setiorini, A., Mushidah, M., & Widjasena, B. (2019). Analisis Postur Kerja Dengan Metode Reba Dan Gambaran Keluhan Subjektif Musculoskeletal Disorders (Msds)(Pada Pekerja Sentra Industri Tas Kendal Tahun 2017). Jurnal Kesehatan, (1), 24-32.
NIOSH. (1997). Musculoskeletal Disorders and Workplace Factors: A Critical Review of Epidemiologic Evidence for Work Related Musculoskeletal Disorders. USA: CDC.
OSHA. (2000). Ergonomics: The Study of Work. U.S Departement of Labor. Occupation Safety and Health, Administration: USA.
Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19-28.
Rinawati, S. (2016). Analisis Risiko Postur Kerja Pada Pekerja Di Bagian Pemilahan Dan Penimbangan Linen Kotor RS. X. Journal of Industrial Hygiene and Occupational Health, 1(1), 39-52.
Sahebagowda, V. K., & Kapali, C. (2016). Ergonomics Study for Injection Moulding Section using RULA and REBA Techniques. International Journal of Engineering Trends and Technology, 36(6), 294-301.
Samudra, P. A. (2018). Analisis Keamanan Aktivitas Penyablonan Pada Morfo Industries Dengan Menggunakan Metode Rula (Rapid Upper Limb Assessment) Dan Reba (Rapid Entire Body Assessment). Jurnal PASTI, Volume XII No. 2, 235 – 248.
Shukriah, A., Baba, M. D., & Jaharah, A. G. (2017). REBA evaluation on garage worker: a case study. Journal of Fundamental and Applied Sciences, 9(5S), 1080-1086.
Siska, M. (2018). Analisis Postur Kerja Manual Material Handling Pada Aktivitas Pemindahan Pallet Dengan Menggunakan Metode Biomekanika Rula (Studi Kasus: Pt. Alam Permata Riau). Jurnal Sains dan Teknologi Industri, 15(2), 77-86.
Soheili-Fard, F., Rahbar, A., & Marzban, A. (2017). Ergonomic investigation of workers in tea factories using REBA and OWAS methods–case study:(Langroud region, Guilan, Iran). Agricultural Engineering International: CIGR Journal, 19(3), 112-119.
Sugiyono. (2012). Memahami Penelitian Kualitatif. Bandung: Alfabeta.
Sugiyono. (2016). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: PT Alfabet.
Tarwaka, et al. (2004). Ergonomi Untuk Kesehatan Keselamatan dan Produktivitas. Edisi I, Cetakan I. Surakarta: UNIBA,Press.
Tarwaka. (2015). Ergonomi Industri, dasar-dasar pengetahuan ergonomi dan aplikasi di tempat kerja: Edisi Kedua. Surakarta: harapan press
Union of Needletrades, Industrial and Textile Employees, the Institute for Work & Health, and the Occupational Health Clinics. (2001). Ergonomic Handbook for the Clothing Industry. Ontario
Wahyuniardi, R., & Reyhanandar, D. M. (2018). Penilaian Postur Operator dan Perbaikan Sistem Kerja dengan Metode RULA dan REBA (Studi Kasus). J@ ti Undip: Jurnal Teknik Industri, 13(1), 45-50. 44
Yadi, Y. H., Kurniawidjaja, L. M., & Susilowati, I. H. (2018). Ergonomics Intervention Study of the RULA/REBA Method in Chemical Industries for MSDs’ Risk Assessment. KnE Life Sciences, 4(5), 181-189.
Zen, Z. H., & Zamora, B. (2016). Analisis Postur Kerja Pada Bagian Gudang Barang Jadi Menggunakan Metode Rapid Entire Body Assessment (REBA). Jurnal Photon, 7(01), 113-119.
Suhada, R. T., Manurung, A., Kholil, M., & Mardikawati, Y. (2018, December). ERGONOMIC WORK ENVIRONMENTAL MANAGEMENT FOR INFORMAL SECTOR WORKERS (CRAFTSMEN EMPING AND CRIPPERS) IN CILEGON CITY. In ICCD (Vol. 1, No. 1, pp. 628-633).
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Jakfat haekal, Bethriza Hanum, Dian Eko Adi Prasetio
This work is licensed under a Creative Commons Attribution 4.0 International License.
