Ergonomic Improvement of Drinking Water Dispenser for Indonesian People Using Rapid Upper Limb Assessment Method
DOI:
https://doi.org/10.31695/IJERAT.2020.3630Keywords:
Ergonomic, Water Dispenser, Water Tap Valve, RULAAbstract
The existing water dispenser has been established in Indonesia for years which has various water tap designs and height levels as well. Unfortunately, the existing water tap design and height level have suited only for certain people with a height of less than 167 cm and therefore other taller people experienced bending posture when operating it. Furthermore, the water tap valve which required both hands to operate has made another effort to fill into the water media. Several research and methodologies have been proposed regarding water tap such as how to avoid water spills using the TRIZ method and how to enhance the smart dispenser through the Internet of Time. None of it discovered how to enhance its ergonomic aspect. However, to achieve improve the ergonomic level, several experiments and measurements have been performed in this research using Rapid Upper Limb Assessment (RULA) method, to generate a recommendation for ergonomic water dispensers.
References
Anizar dkk (2018), Rancangan Fasilitas Kerja Ergonomis Pada Stasiun Pemarutan Tepung Tapioka, Seminar dan Konferensi Nasional IDEC (ISSN : 2579-6429).
Djiono, Yongly Kusnandar, et all (2013), Working Posture Analysis And Design Using RULA (Rapid Upper Limb Assessment) Method In Production Process at PT. Indana Paint, Jurnal Ilmiah Teknik Industri, Vol. 12, No.2,Desember2013 (ISSN 1412-6869)
McAtamney, L. and Corlett, E.N. (1993). "RULA -: A Survey Method for Investigation of Work related Upper Limb Disorders. Applied Ergonomics.
Nurmianto, Eko. (2004). Ergonomi, Konsep Dasar dan Aplikasinya, Edisi 2, Guna Widya, Surabaya.
Kottler, Philip (2010). Manajemen Pemasaran Jilid 2 ; Edisi 13, Erlangga, Jakarta.
Irianto, Djoko Pekik (2017). Pedoman Gizi Lengkap Keluarga dan Olahragawan, Edisi Revisi, Penerbit Andi, Yogyakarta.
Shabila, Anjani et all (2013), Design of Ergonomis Stool (Dingklik) for Batik Crafters, International Journal of Technology (ISSN 2086-9614).
Sokhibi, Akhmad (2017), Perancangan Kursi Ergonomis Untuk Memperbaiki Posisi Kerja Pada Proses Packaging Jenang Kudus, Jurnal Rekayasa Sistem Industri (ISSN : 2477-2089).
Sutalaksana, Iftikar (2006). Teknik Perancangan Sistem Kerja ; Edisi Kedua, ITB Bandung.
Sugiyono (2017). Statistika Untuk Penelitian. Alfabeta Bandung.
Suhardi, Bambang (2015). Perancangan Sistem Kerja ; Cetakan 1, UPT UNS Press Surakarta.
Torik (2015), Analisa Postur Dengan Metode RULA untuk Kerja Administrasi, Sinergi (ISSN: 1410-2331)
Ulrich, Karl T. dan Eppinger, Steven D. ; Perancangan dan Pengembangan Produk; Edisi Pertama – Jakarta ; 2001, Salemba Teknika, Jakarta
Yusuf, M. et all (2016), The Improvement of Work Posture Using RULA (Rapid Upper Limb Assessment) Analysis to Decrease Subjectie Disorders of Strawberry Farmers in Bali, International Research Journal of Engineering, IT & Scientific Research (ISSN 2454-2261)
Downloads
Published
Issue
Section
License
Copyright (c) 2020 F.A. Bayu Satya Wijaya, Bethriza Hanum, Hardi Triyono Putra
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.