Key Success Factors for Critical Chain Project Management (CCPM) and 4D Building Information Modeling (BIM) for Improving Time Performance in Basement Work on 5 Layers of High-rise Residential Buildings in Indonesia

Authors

  • Truman Sinaga Program of Civil Engineering, Mercu Buana University Jakarta Indonesia
  • Albert Eddy Husin Program of Civil Engineering Mercu Buana University Jakarta Indonesia

DOI:

https://doi.org/10.31695/IJERAT.2021.3701

Keywords:

Critical Chain Project Management, BIM, SPSS, Basement work

Abstract

Referring to data released by The Skyscrapper Center in 2020, during the period 1960 - 2020 there was a rapid increase in the construction of buildings with a height of more than 150 meters around the world. The increase in high-rise residential buildings or high rise buildings according to the global competitiveness report data from 2014 - 2020 will be the largest growth country in the construction sector with an average total growth value of 6.3% so that engineers - architecture carry out and make project management engineering from the initial project phase to the project completion phase and the increasing complexity of problems in the planning process to the management of high-rise residential buildings. The need for housing in Indonesia, especially in big cities, is high and the limited availability of land causes prices to increase, so that investment in residential high rise buildings is growing rapidly. The high demand for the community is directly proportional to the increase in the number of residential building construction for high-rise buildings. Building construction is expected by service providers to be completed on time without delay according to their planning. However, in the implementation of development there are problems that cause delays in its implementation. The delay that occurs can be from internal, external and weather factors. For this reason, this research will discuss the key success factors of critical chain project management (CCPM) and 4D building information modeling (BIM) for improving time performance on the basement work of 5 layers of high-rise residential buildings. To obtain the key success factors, the researchers used the SPSS (Statistical product and service solutions) tool. From the results of this SPSS, the researchers found 10 key success factors, namely 1. Project identification against time, 2. Basement design complexity, 3. Effect of project buffers, fedding buffer , buffer resources, 4. Accuracy of document design, 5. Scheduling and Simulation, 6. Logical relations of activities, 7. Policy and government support, 8. Top down methods, 9. Land conditions, and 10. Eliminating safety time. The 10 key success factors are expected to reduce delays in the implementation of development.

References

Graham Robinson. (2016). Global construction market to grow $8 trillion by 2030: driven by China, US and India. 44(0), 1–3. https://www.databasedanalysis.com/global-construction-perspectives/

Lukas, J. A. (2007). Is your schedule correct?Common scheduling mistakes and how to avoid them. PMI Global Congress 2007-North America, Atlanta, GA. Newtown Square, PA: Project Management Institute

Akram Akhund, M., Raza Khoso, A., Memon, U., Khahro, S. H., & Scholar, P. (2017). Time Overrun in Construction Projects of Developing Countries. Imperial Journal of Interdisciplinary Research (IJIR, 3(5), 124–129.

Candelario-Garrido, A., García-Sanz-Calcedo, J., & Reyes Rodríguez, A. M. (2017). A quantitative analysis on the feasibility of 4D Planning Graphic Systems versus Conventional Systems in building projects. Sustainable Cities and Society, 35, 378–384. https://doi.org/10.1016/j.scs.2017.08.024

Moon, H., Kim, H., Kamat, V. R., & Kang, L. (2015). BIM-Based Construction Scheduling Method Using Optimization Theory for Reducing Activity Overlaps. Journal of Computing in Civil Engineering, 29(3), 04014048. https://doi.org/10.1061/(asce)cp.1943-5487.0000342

Kerzner, H. (2006). Project Management: A Systems Approach to Planning, Scheduling, and Controlling (Ninth Edit). Canada: John Wiley & Sond.

Rand, G. K. (2000). Critical chain: The theory of constraints applied to project management. International Journal of Project Management, 18(3), 173–177. https://doi.org/10.1016/S0263-7863(99)00019-8

Goldratt, E., Critical Chain, 1997 (North River Press: Great Barrington, MA)

Sadeghi, M., & Roghanian, E. (2017). Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism. Scientia Iranica, 24(2), 808–822. https://doi.org/10.24200/sci.2017.4063

Rozenes, S., Vitner, G., Spraggett, S., 2004. MPCS: multidimensional project control system. Int. J. Proj. Manag. 22, 109–118

Ahlemann, F., El Arbi, F., Kaiser, M. G., & Heck, A. (2013). A process framework for theoretically grounded prescriptive research in the project management field. International Journal of Project Management, 31(1), 43–56. https://doi.org/10.1016/j.ijproman.2012.03.008

Horroelen W, Leus R. 2001. On the merit and pitfalls of critical chain scheduling. J Oper Manage. 19:559–577.

Rand, G. K. (2000). Critical chain: The theory of constraints applied to project management. International Journal of Project Management, 18(3), 173–177. https://doi.org/10.1016/S0263-7863(99)00019-8

Horroelen W, Leus R. 2001. On the merit and pitfalls of critical chain scheduling. J Oper Manage. 19:559–577.

Sadeghi, M., & Roghanian, E. (2017). Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism. Scientia Iranica, 24(2), 808–822. https://doi.org/10.24200/sci.2017.4063

Rand, G. K. (2000). Critical chain: The theory of constraints applied to project management. International Journal of Project Management, 18(3), 173–177. https://doi.org/10.1016/S0263-7863(99)00019-8

Newbold RC. 1998. Project management in the fast lane: applying the theory of constraints. New York (NY): St. Lucie Press.

Horroelen W, Leus R. 2001. On the merit and pitfalls of critical chain scheduling. J Oper Manage. 19:559–577.

Jung, Y., & Joo, M. (2011). Building information modelling (BIM) framework for practical implementation. Automation in Construction, 20(2), 126–133. https://doi.org/10.1016/j.autcon.2010.09.010

Eastman, C. M., and Sacks, R. (2008). “Relative productivity in the AEC industries in the United States for on-site and off-site activities.” Journal of Construction Engineering in Management, 134(7), 517–526.

Pazlar, T., & Turk, Ž. (2008). Interoperability in practice: Geometric data exchange using the IFC standard. Electronic Journal of Information Technology in Construction, 13(March), 362–380.

Asiyanto, Ir, MBA, IPM. 2008. Manajemen Alat Berat Untuk Konstruksi, Penerbit PT. Pradnya Paramita. Jakarta.

Barber, B. (1984): Strong Democracy: Participatory Politics for a New Age. Berkeley: University of California Press

Husin, A. E., Setyawan, T. L., Meidiyanto, H., Kussumardianadewi, B. D., & Eddy Husin, M. K. (2019). Key success factors implementing BIM based quantity take-off in fit-out office work using relative importance index. International Journal of Engineering and Advanced Technology, 8(6), 986–990. https://doi.org/10.35940/ijeat.F82650.88619

Alaghbari, W., Al-Sakkaf, A. A., & Sultan, B. (2019). Factors affecting construction labour productivity in Yemen. International Journal of Construction Management, 19(1), 79–91. https://doi.org/10.1080/15623599.2017.1382091

Downloads

Published

2021-04-20

How to Cite

Key Success Factors for Critical Chain Project Management (CCPM) and 4D Building Information Modeling (BIM) for Improving Time Performance in Basement Work on 5 Layers of High-rise Residential Buildings in Indonesia. (2021). International Journal of Engineering Research and Advanced Technology (ijerat) (E-ISSN 2454-6135) , 7(4), 22-33. https://doi.org/10.31695/IJERAT.2021.3701